CLEARING DTC [VEHICLE CONTROL MODULE (V/C-MODULE)]
id0102i0865400
CMDTC Self Test
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Switch the ignition to off.
6. Switch the ignition ON (engine off or on) and wait for 5 s or more.
7. Perform DTC inspection. (See DTC INSPECTION [VEHICLE CONTROL MODULE (V/C-MODULE)].)
8. Verify that no DTCs are displayed.
ODDTC Self Test
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Switch the ignition to off.
6. Switch the ignition ON (engine off or on) and wait for 5 s or more.
7. Perform DTC inspection. (See DTC INSPECTION [VEHICLE CONTROL MODULE (V/C-MODULE)].)
8. Verify that no DTCs are displayed.