OIL PRESSURE INSPECTION [SKYACTIV-D 1.5]

id0111q2800300

1.  Connect the M-MDS to the DLC-2.

2.  Start the engine and warm it up.

3.  Select the engine hydraulic pressure (PID: EOP) and the engine speed (PID: RPM) using the M-MDS data monitor function.

4.  Verify the engine hydraulic pressure (PID: EOP) value while the engine maintains a constant speed.

•  If not within the specification, determine the malfunctioning location referring to the following DTCs “Possible Cause” and repair or replace the applicable part.

―  P0524:00 (Engine oil pressure too low)

―  P055F:00 (Engine oil pressure control circuit low oil pressure)

―  P06DD:00 (Engine oil pressure switch control circuit high input)

―  P06DE:00 (Engine oil pressure switch control circuit low input)

Note

•  The oil pressure can vary with oil viscosity, temperature, and engine speed.