THERMOSTAT INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5]

id0112h9801300

1.  Remove the thermostat. (See THERMOSTAT REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Visually check that the thermostat valve is closed.

3.  Place the thermostat in water.

Warning

•  During inspection, the thermostat and water are extremely hot and can cause severe burns. Do not touch the thermostat and water.

4.  Heat the water and check the following.

•  Opening temperature and valve lift

―  If there is a malfunction, replace the thermostat.