SEDIMENTOR SWITCH INSPECTION [SKYACTIV-D 1.5]

id0114q2085700

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Perform the “Fuel Line Safety Procedure” referring to the “BEFORE SERVICE PRECAUTION”. (See BEFORE SERVICE PRECAUTION [SKYACTIV-D 1.5].)

3.  Drain the fuel from the fuel filter.

4.  Remove the sedimentor switch. (See FUEL FILTER REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

5.  Verify that there is continuity when pulling up the float as shown in the figure.

ac5wzw00005785

•  If there is no continuity, replace the sedimentor switch. (See FUEL FILTER REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)