INTAKE SHUTTER VALVE INSPECTION [SKYACTIV-D 2.2]

id0116e1093500


Resistance inspection

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

3.  Disconnect the intake shutter valve connector.

4.  Inspect the resistance between intake shutter valve terminals A and B.

ac5jjw00003544

Intake shutter valve resistance (specification)
0.3—100 ohms [20 °C {68 °F}]
•  If not within the specification, replace the intake shutter valve. (See INTAKE SHUTTER VALVE REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)