CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [MZR 1.6]

id0140j7801500

Caution

•  When replacing the CMP sensor, make sure there is no foreign matter on it such as metal shavings. If it is installed with foreign matter, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)

2.  Disconnect the CMP sensor connector.

3.  Remove the CMP sensor.

am3zzw00011559

4.  Install in the reverse order of removal.