CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [MZR 1.6]

id0140j7801600

Continuity Inspection

1.  Verify that the CPP switch is installed properly. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [F35M-R].)

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)

3.  Disconnect the CPP switch connector.

4.  Verify that the continuity between CPP switch terminals A and B when the clutch pedal is depressed and when it is released is according to the following table:

am3zzw00014155

•  If not as verified, replace the CPP switch. (See CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION [F35M-R].)