INTAKE AIR TEMPERATURE (IAT) SENSOR INSPECTION [MZR 1.6]

id0140j7802200

Resistance Inspection

Note

•  Because the IAT sensor is integrated in the MAF sensor, replacing the IAT sensor includes replacement of the MAF/IAT sensor.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)

2.  Disconnect the MAF/IAT sensor connector.

3.  Measure the resistance between MAF/IAT sensor terminals D and E.

am3zzw00011561

•  If not as specified, replace the MAF/IAT sensor. (See MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REMOVAL/INSTALLATION [MZR 1.6].)

Specification (Reference)

IAT (°C {°F})	Resistance (Kilohms)
20 {68}	2.21—2.69
60 {140}	0.493—0.667

am3zzw00014159