REAR WHEEL ALIGNMENT

id021100800300

Rear wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
Tire
[Tolerance ±4 {0.2}]
(mm {in})
1.9 {0.075}
Rim inner
[Tolerance ±3 {0.1}]
Vehicle equipped with 16 inch wheel: 1.2 {0.047}
Vehicle equipped with 18 inch wheel: 1.3 {0.051}
(degree)
0°10′±0°20′
Camber angle*2 (Reference value)
[Tolerance ±1°]
Normal ground clearance*3
-0°50′
-0°53′
-0°55′
-0°57′
-0°59′
High ground clearance*4
-0°37′
-0°39′
-0°42′
-0°45′
-0°46′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°00′

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.
*3  :Distance between wheel center and fender brim is 397 mm {15.6 in} (reference value).
*4  :Distance between wheel center and fender brim is 407 mm {16.0 in} (reference value).

Total Toe-in Adjustment

1.  Loosen the installation nut of the adjusting cam bolt.

2.  Rotate the adjusting cam bolt in either direction to adjust the toe-in.

ac5wzw00002458

 

Left wheel

Right wheel
Toe-out direction
Clockwise
Counterclockwise
Toe-in direction
Counterclockwise
Clockwise

Note
•  The rotation direction of the adjusting cam bolt is indicated as viewed from the front of the vehicle.

3.  Tighten the nut.

Tightening torque
84—101 N·m {8.6—10 kgf·m, 62—74 ft·lbf}