DTC P0711:00 [EW6A-EL]
id050234817300
DTC P0711:00 |
TFT sensor range/performance problem |
---|---|
DETECTION CONDITION
|
• Under the following conditions, the ATF temperature is 40 °C {104 °F} or less:
• Under the following conditions, the ATF temperature is 120 °C {248 °F} or more:
|
FAIL-SAFE FUNCTION
|
• Inhibits learning control.
• Inhibits neutral idle control.
• Inhibits i-stop control.
|
POSSIBLE CAUSE
|
• TFT sensor malfunction
• Coupler component malfunction
• TCM malfunction
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
Diagnostic procedure
STEP |
INSPECTION |
ACTION |
|
---|---|---|---|
1
|
RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION
• Record the freeze frame data/snap shot data.
|
—
|
Go to the next step.
|
2
|
VERIFY RELATED SERVICE INFORMATION AVAILABILITY
• Verify related Service Information availability.
• Is any related Service Information available?
|
Yes
|
Perform repair or diagnosis according to the available Service Information.
• If the vehicle is not repaired, replace the control valve body.
Go to the next step.
|
No
|
Replace the control valve body, then go to the next step.
|
||
3
|
VERIFY DTC TROUBLESHOOTING COMPLETED
• Clear the DTC using the M-MDS.
• Perform the following procedure to ensure that the DTC has been resolved:
• Perform the DTC inspection using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
No
|
DTC troubleshooting completed.
|