AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [CW6A-EL]

id0517l1118600

Warning

• Do not perform the servicing while the ATF is hot. Otherwise, it could cause severe burns or serious injury.

1. Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)

2. Disconnect the wiring harness from the front crossmember. (Vehicle with i-ELOOP)

am6zzw00009023

3. Remove the dipstick securing bolt.

4. Remove the dipstick.

am2zzw00007729

5. Remove the drain plug and washer, and drain the ATF.

6. Install a new washer and drain plug.

am2zzw00007730

Tightening torque

30—41 N·m {3.1—4.1 kgf·m, 23—30 ft·lbf}

7. Add ATF from the dipstick installation hole.

Note

• The ATF color is blue.

• Only use ATF FZ for the CW6A-EL.

ATF type

ATF FZ

Resupply amount (Reference)

ATF is drained from drain plug: 3.0 L {3.2 US qt, 2.6 Imp qt}

9. Insert the dipstick and install the securing bolt.

am2zzw00007729

Tightening torque

8—11 N·m {82—112 kgf·cm, 71—97 in·lbf}

10. Connect the wiring harness to the front crossmember. (Vehicle with i-ELOOP)

am6zzw00009023

11. Install the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)