DTC INSPECTION [INSTRUMENT CLUSTER]
id0902e8960300
CMDTC Self Test
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
3. Verify the DTC according to the directions on the screen.
4. After completion of repairs, clear all DTCs stored in the instrument cluster. (See CLEARING DTC [INSTRUMENT CLUSTER].)
ODDTC Self Test
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
3. Verify the DTC according to the directions on the screen.
4. After completion of repairs, clear all DTCs stored in the instrument cluster. (See CLEARING DTC [INSTRUMENT CLUSTER].)
Snapshot Data
|
Snapshot data item |
Unit |
Data contents |
Data read/use method |
Corresponding data monitor items |
|
|---|---|---|---|---|---|
|
AAT
|
°C
|
°F
|
Ambient temperature
|
—
|
—
|
|
APP_STATUS
|
Accelerator Pedal Off/Under20%/Over20%/FAIL
|
Accelerator pedal position status
|
—
|
—
|
|
|
CFG_STATUS
|
Config Complete/Not Configured/Config Error
|
Instrument cluster configuration status
|
—
|
—
|
|
|
ECT_STATUS
|
Under 0 degrees C/0 - Under 80 degrees C/Over 80 degrees C/FAIL
|
Engine coolant temperature status
|
—
|
—
|
|
|
IC_VPWR
|
V
|
Instrument cluster power supply voltage
|
When DTC is detected, instrument cluster displays power supply voltage value of instrument cluster in M-MDS.
|
VPWR
|
|
|
IG-ON_TIMER
|
hh:mm:ss*1
|
Elapsed time since ignition was switched ON (engine off or on)
|
When DTC is detected, instrument cluster displays elapsed time since ignition was switched ON (engine off or on) in M-MDS.
|
—
|
|
|
PWR_MODE_KEY
|
Key Out/Key Recently Out (Position 0)/Accessory (Position 1)/Post Ignition (Position 2)/Ignition On (Position 2)/Running (Position 2)/Running - Starting
|
• Key Out: Ignition switched off
• Key Recently Out (Position 0): Elapsed time within 3 s since ignition was switched off
• Accessory (Position 1): Ignition is switched to ACC
• Post Ignition (Position 2): Elapsed time within 3 s since ignition was switched ON (engine off or on)
• Ignition On (Position 2): Ignition switched ON (engine off)
• Running (Position 2): Ignition switched ON (engine on)
• Running - Starting: Cranking condition
|
When DTC is detected, instrument cluster displays ignition switch status in M-MDS.
|
—
|
|
|
RPM_STATUS
|
Engine Stop/Under1500rpm/Over1500rpm/FAIL
|
Engine speed status
|
When DTC is detected, instrument cluster displays engine speed in M-MDS.
|
TACHOMTR
|
|
|
SHIFT_STATUS
|
P/N/D/R/FAIL
|
Selector lever position status
|
When DTC is detected, instrument cluster displays selector lever position in M-MDS.
|
—
|
|
|
TOTAL_DIST
|
km
|
Miles
|
Accumulated total traveled distance from completion of vehicle until instrument cluster detects DTC (Odometer value in instrument cluster)
|
The total traveled distance from which the instrument cluster detects DTCs to the present can be calculated by performing the following procedure.
1. Verify the odometer value in the instrument cluster.
2. Verify the snapshot data item TOTAL_DIST.
3. Subtract 2 from 1.
|
—
|
|
TOTAL_TIME
|
hh:mm:ss*1
|
Accumulated total elapsed time since vehicle completion until instrument cluster detects a DTC
|
The elapsed time from which the instrument cluster detects DTCs to the present can be calculated by performing the following procedure.
1. Verify the instrument cluster PID item TOTAL_TIME.
2. Verify the snapshot data item TOTAL_TIME.
3. Subtract 2 from 1.
|
TOTAL_TIME
|
|
|
VPWR
|
V
|
Instrument cluster power supply voltage
|
—
|
VPWR
|
|
|
VSPD_STATUS
|
Stop/0-10km/h/Over10km/h/FAIL
|
Vehicle speed status
|
When DTC is detected, instrument cluster displays vehicle speed in M-MDS.
|
SPEEDOMTR
|
|