DTC: 29:Er01, 29:Er09 [AUDIO]
id0902f6452500
|
Description |
29:Er01 : iPod mechanism malfunction 29:Er09 : No iPod playback file/track |
|---|---|
|
Detection condition
|
When iPod is connected, audio unit read error is detected
|
|
Fail-safe function
|
Not applicable
|
|
Possible cause
|
• All files in iPod are not playable (including copyright protected files)
• No playable file in iPod
• iPod malfunction
• Audio unit malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY MUSIC FILES IN iPod
• Is there any playable music file in the iPod?
|
Yes
|
Go to the next step.
|
|
No
|
System is normal. (No playable file in USB device/iPod)
Go to Step 3.
|
||
|
2
|
INSPECT iPod
• Connect the iPod to a same-model vehicle (model/unit).
• Is the iPod connection detected/unit plays back?
|
Yes
|
Go to the next step.
|
|
No
|
System is normal. (iPod malfunction or incompatible USB device.)
Go to the next step.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the audio unit DTCs.
(See CLEARING DTC [AUDIO].)
• Perform the audio unit DTC inspection.
(See DTC INSPECTION [AUDIO].)
• Is the same DTC displayed?
|
Yes
|
Return to Step 1 and inspect for other possible causes.
If the malfunction recurs, replace the audio unit, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [AUDIO].)
|
|
No
|
DTC troubleshooting completed.
|
||