POWER WINDOW SYSTEM INITIALIZATION PROCEDURE

id091200004100

Note

•  If the following operations have been performed, the initial window setting is reset, and auto up/down operations are disabled. Therefore, reestablishing the initial setting is necessary.

―  Negative battery cable is disconnected.

―  Power window main switch connector is disconnected.

―  Power window system power supply fuse is removed.

1.  Switch the ignition ON (engine on or off).

2.  Press the driver's seat side door glass switch (the power window main switch) to fully open the door glass.

3.  Pull up and hold the driver's seat side door glass switch (the power window main switch) until the door glass is fully closed. Once fully closed, keep holding the switch up for approx. 2 s.