REAR BELTLINE MOLDING REMOVAL/INSTALLATION

id091600804700

Black molding type

Caution

•  Before servicing, affix protective tape on the rear door outer panel when detaching the rear beltline molding clips from the rear door outer panel. Otherwise, the rear door outer panel could interfere with the remover tool and be damaged.

am3uuw00011766

1.  Fully open the rear door glass.

2.  Insert a remover tool into the position shown in the figure, move it in the direction of arrows (1), detach the rear beltline molding clip from the door panel.

am3zzw00020446

3.  Pull the rear beltline molding up in the direction of arrow (2).

4.  Insert a remover tool into the position shown in the figure, move it in the direction of arrows (1), and detach the rear beltline molding clip from the door panel.

am3zzw00020447

5.  Pull the rear beltline molding up in the direction of arrow (2).

6.  Rotate the rear beltline molding in the direction of the arrow shown in the figure remove it while detaching the rear beltline molding tabs from the door panel.

am3zzw00020448

7.  Install in the reverse order of removal.

Bright molding type

Caution

•  Before servicing, affix protective tape on the rear door outer panel when detaching the rear beltline molding clips from the rear door outer panel. Otherwise, the rear door outer panel could interfere with the remover tool and be damaged.

am3uuw00012172

1.  Fully open the rear door glass.

2.  Insert a remover tool into the position shown in the figure, move it in the direction of arrows (1), detach the rear beltline molding clip from the door panel.

am3zzw00020449

3.  Pull the rear beltline molding up in the direction of arrow (2).

4.  Insert a remover tool into the position shown in the figure, move it in the direction of arrows (1), and detach the rear beltline molding clip from the door panel.

am3zzw00020450

5.  Pull the rear beltline molding up in the direction of arrow (2).

6.  Insert a remover tool into the position shown in the figure, move it in the direction of arrows (1), and move the rear beltline molding in the direction of arrows (2), and detach the rear beltline molding clip from the door panel.

am3zzw00020451

7.  Pull the rear beltline molding up in the direction of arrow (3).

8.  Rotate the rear beltline molding in the direction of the arrow shown in the figure remove it while detaching the rear beltline molding tabs from the door panel.

am3zzw00020452

9.  Install in the reverse order of removal.