COLUMN COVER REMOVAL/INSTALLATION
id091700800800
1. Lower the steering wheel to the bottommost position.
2. Press the shaded area shown in the figure using your thumb, lift the upper column cover in the direction of arrows (1), and detach the pins, tabs, and guides.
|
3. Detach the tab and remove the upper column cover from the meter hood cover.
|
4. Remove screws.
|
5. Open the lower column cover in the direction of arrow (1) shown in the figure, move the lower column cover in the direction of arrow (2), and detach the tabs of the light switch and the wiper and washer switch from the lower column cover.
|
6. Lower the adjusting lever to the bottommost position.
|
7. Move the lower column cover in the direction of the arrow shown in the figure and remove it while detaching the guide.
|
8. Install in the reverse order of removal.