CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE

id092000013100

Distance Recognition Support System (DRSS)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Distance Recognition Support System] on the center display.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Mode

The operation of distance recognition support system (DRSS) can be turned off.

On

On / Off

Vehicle control module (V/C-module)

Warning Distance

The operation distance for the alert function can be changed.

Short

Long / Middle / Short

Vehicle control module (V/C-module)

Reset

Returns the setting content of the distance recognition support system to the initial setting.

No

No / Yes

Vehicle control module (V/C-module)

Display of center display	Function	Initial setting	Settings	Control module
Mode	The operation of distance recognition support system (DRSS) can be turned off.	On	On / Off	Vehicle control module (V/C-module)
Warning Distance	The operation distance for the alert function can be changed.	Short	Long / Middle / Short	Vehicle control module (V/C-module)
Reset	Returns the setting content of the distance recognition support system to the initial setting.	No	No / Yes	Vehicle control module (V/C-module)

Smart Brake Support (SBS)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Smart Brake Support] on the center display.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Mode

The operation of Smart Brake Support (SBS) can be turned off.

On

On / Off

Laser sensor

Warning Distance^*1

The detection range of Smart Brake Support (SBS) system can be changed.

Short

Long / Middle / Short

Laser sensor

Reset

Returns the setting content of the smart brake support (SBS) system to the initial setting.

No

No / Yes

Laser sensor

Display of center display	Function	Initial setting	Settings	Control module
Mode	The operation of Smart Brake Support (SBS) can be turned off.	On	On / Off	Laser sensor
Warning Distance^*1	The detection range of Smart Brake Support (SBS) system can be changed.	Short	Long / Middle / Short	Laser sensor
Reset	Returns the setting content of the smart brake support (SBS) system to the initial setting.	No	No / Yes	Laser sensor

*1 :Except for European specs and U.K. specs (These specs cannot change the detection range of Smart Brake Support (SBS).)

Smart City Brake Support (SCBS)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Smart City Brake Support

The operation of smart city brake support (SCBS) can be turned off.

On

On / Off

Laser sensor

Display of center display	Function	Initial setting	Settings	Control module
Smart City Brake Support	The operation of smart city brake support (SCBS) can be turned off.	On	On / Off	Laser sensor

Rear Vehicle Monitoring (RVM) System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Rear Vehicle Monitoring Volume

The volume of the rear vehicle monitoring (RVM) warning alarm can be changed.

High

High / Low / Off

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Rear Vehicle Monitoring Volume	The volume of the rear vehicle monitoring (RVM) warning alarm can be changed.	High	High / Low / Off	Instrument cluster

Blind Spot Monitoring (BSM) System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Blind Spot Monitor Volume

The volume of the blind spot monitoring (BSM) warning alarm can be changed.

High

High / Low / Off

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Blind Spot Monitor Volume	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	High / Low / Off	Instrument cluster

Lane Departure Warning System (LDWS)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Lane Departure Warning System] on the center display.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Timing

The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.

Before Line

At Line / Before Line

FSC

Warning

The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.

Low

High / Low

FSC

Sound

The type of the LDWS warning alarm can be changed.

Rumble

Beep / Rumble

Instrument cluster

Beep Volume

The volume of the LDWS warning alarm (Beep) can be changed.

Low

High / Low

Instrument cluster

Rumble Strip Volume

The volume of the LDWS warning alarm (Rumble) can be changed.

Low

High / Mid / Low

Instrument cluster

Reset

Returns the setting content of the lane departure warning system to the initial setting.

No

No / Yes

• FSC

• Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Timing	The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.	Before Line	At Line / Before Line	FSC
Warning	The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.	Low	High / Low	FSC
Sound	The type of the LDWS warning alarm can be changed.	Rumble	Beep / Rumble	Instrument cluster
Beep Volume	The volume of the LDWS warning alarm (Beep) can be changed.	Low	High / Low	Instrument cluster
Rumble Strip Volume	The volume of the LDWS warning alarm (Rumble) can be changed.	Low	High / Mid / Low	Instrument cluster
Reset	Returns the setting content of the lane departure warning system to the initial setting.	No	No / Yes	• FSC • Instrument cluster

Auto Wiper System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Rain Sensing Wiper

The auto wiper function can be disabled.

On

On / Off^*1

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Settings	Control module
Rain Sensing Wiper	The auto wiper function can be disabled.	On	On / Off^*1	Rear body control module (RBCM)

*1 :If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.

Door Locks Systems

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Door Lock] on the center display.

5. Select an item name, and then select option.

Advanced keyless entry system

Display of center display

Function

Initial setting

Settings

Control module

Keyless Lock Beep Volume

The keyless beeper volume can be adjusted.

Medium

High / Medium / Low / Off

Start stop unit

Auto Relock Time

The operation start time of the auto re-lock function can be changed.

30 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Walk Away Lock

The out-of-area (reception area) type auto lock function can be set.

Off

Off / On

Start stop unit

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

Start stop unit

Display of center display	Function	Initial setting	Settings	Control module
Keyless Lock Beep Volume	The keyless beeper volume can be adjusted.	Medium	High / Medium / Low / Off	Start stop unit
Auto Relock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	30 seconds / 60 seconds / 90 seconds	Start stop unit
Walk Away Lock	The out-of-area (reception area) type auto lock function can be set.	Off	Off / On	Start stop unit
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	Start stop unit

Keyless entry system

Display of center display

Function

Initial setting

Settings

Control module

Auto Relock Time

The operation start time of the auto re-lock function can be changed.

30 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

Start stop unit

Display of center display	Function	Initial setting	Settings	Control module
Auto Relock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	30 seconds / 60 seconds / 90 seconds	Start stop unit
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	Start stop unit

Turn Light System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Turn] on the center display.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

On

On / Off

Rear body control module (RBCM)

Turn Signal Volume

The volume of the turn and hazard indicator alarm can be changed.

High

High / Low

Instrument cluster

Reset

Returns the setting content of the turn light system to the initial setting.

No

No / Yes

• Rear body control module (RBCM)

• Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
3-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	On	On / Off	Rear body control module (RBCM)
Turn Signal Volume	The volume of the turn and hazard indicator alarm can be changed.	High	High / Low	Instrument cluster
Reset	Returns the setting content of the turn light system to the initial setting.	No	No / Yes	• Rear body control module (RBCM) • Instrument cluster

Lighting Systems

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Lighting] on the center display.

5. Select an item name, and then select option.

Room light control system

Display of center display

Function

Initial setting

Settings

Control module

Interior Light Timeout - Doors Open

•  The front/rear map light illumination time after any door is opened can be changed.

•  The trunk compartment light (4SD)/cargo compartment light (5HB) illumination time after the trunk lid (4SD)/liftgate (5HB) is opened can be changed.

30 minutes

60 minutes / 30 minutes / 10 minutes

Rear body control module (RBCM)

Interior Light Timeout - Doors Closed

The front/rear map light illumination time after all the doors are closed can be changed.

15 seconds

60 seconds / 30 seconds / 15 seconds / 7.5 seconds

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Interior Light Timeout - Doors Open	• The front/rear map light illumination time after any door is opened can be changed. • The trunk compartment light (4SD)/cargo compartment light (5HB) illumination time after the trunk lid (4SD)/liftgate (5HB) is opened can be changed.	30 minutes	60 minutes / 30 minutes / 10 minutes	Rear body control module (RBCM)
Interior Light Timeout - Doors Closed	The front/rear map light illumination time after all the doors are closed can be changed.	15 seconds	60 seconds / 30 seconds / 15 seconds / 7.5 seconds	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

Auto light-off system

Display of center display

Function

Initial setting

Settings

Control module

Headlight Off Timer

The headlight emitted time of the auto light off timer can be changed.

30 seconds

120 seconds / 90 seconds / 60 seconds / 30 seconds / Off

Rear body control module (RBCM)

Display of center display	Function	Initial setting	Settings	Control module
Headlight Off Timer	The headlight emitted time of the auto light off timer can be changed.	30 seconds	120 seconds / 90 seconds / 60 seconds / 30 seconds / Off	Rear body control module (RBCM)

High beam control (HBC) system

Display of center display

Function

Initial setting

Settings

Control module

High Beam Control

The high beam control (HBC) system can be switched between operable and inoperable.

On

On / Off

FSC

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
High Beam Control	The high beam control (HBC) system can be switched between operable and inoperable.	On	On / Off	FSC
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

Lights-on reminder warning alarm

Display of center display

Function

Initial setting

Settings

Control module

Light On Reminder Vol

The volume for the lights-on reminder warning alarm can be changed.

High or Off^*1

High / Low / Off

Instrument cluster

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Light On Reminder Vol	The volume for the lights-on reminder warning alarm can be changed.	High or Off^*1	High / Low / Off	Instrument cluster
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

*1 :The setting of the lights-on reminder can be changed with the time setting of auto light off system set to Off.

Running light system (australian specs.)

Display of center display

Function

Initial setting

Settings

Control module

Daytime Running Lights

The running light system function can be set.

On

On / Off

Front body control module (FBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Daytime Running Lights	The running light system function can be set.	On	On / Off	Front body control module (FBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

Auto light system

Display of center display

Function

Initial setting

Settings

Control module

Auto Headlight On

Auto light sensor sensitivity can be changed.

Medium

Light / Medium Light / Medium / Medium Dark / Dark

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Auto Headlight On	Auto light sensor sensitivity can be changed.	Medium	Light / Medium Light / Medium / Medium Dark / Dark	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

Coming home light system

Display of center display

Function

Initial setting

Settings

Control module

Coming Home Lights Timer

The coming home light system operation time can be switched.

30 seconds

Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Coming Home Lights Timer	The coming home light system operation time can be switched.	30 seconds	Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

Leaving home light system

Display of center display

Function

Initial setting

Settings

Control module

Leaving Home Lights

The leaving home light system can be switched between operable and inoperable.

Off (except European (L.H.D. U.K.) specs.)/On (European (L.H.D. U.K.) specs.)

On / Off

Rear body control module (RBCM)

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  Front body control module (FBCM)

•  Rear body control module (RBCM)

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Leaving Home Lights	The leaving home light system can be switched between operable and inoperable.	Off (except European (L.H.D. U.K.) specs.)/On (European (L.H.D. U.K.) specs.)	On / Off	Rear body control module (RBCM)
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• Front body control module (FBCM) • Rear body control module (RBCM) • FSC • Instrument cluster

Language

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Language

The display language can be changed.

English

English/French/German/Italian/Spanish/Russian/Portuguese/Dutch/Swedish/Danish/Norwegian/Finnish/Czech/Slovakian/Hungarian/Turkish/Polish/Estonian/Latvian/Lithuanian/Greek/Croatian/Bulgarian/Romanian/Serbian/Hebrew

Connectivity master unit (CMU)

Display of center display	Function	Initial setting	Settings	Control module
Language	The display language can be changed.	English	English/French/German/Italian/Spanish/Russian/Portuguese/Dutch/Swedish/Danish/Norwegian/Finnish/Czech/Slovakian/Hungarian/Turkish/Polish/Estonian/Latvian/Lithuanian/Greek/Croatian/Bulgarian/Romanian/Serbian/Hebrew	Connectivity master unit (CMU)

Distance

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Distance

The distance unit can be changed.

Miles or km^*1

Miles / km

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Distance	The distance unit can be changed.	Miles or km^*1	Miles / km	Instrument cluster

*1 :The initial value differs depending on the market.

Temperature (type A,B,C instrument cluster only)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Temp^*1

The temperature unit can be changed.

°F or °C^*2

°F /°C

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Temp^*1	The temperature unit can be changed.	°F or °C^*2	°F /°C	Instrument cluster

*1 :When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

*2 :The initial value differs depending on the market.

Intelligent Drive Master (i-DM)

1. Switch the ignition ON (engine off or on).

2. Select [Applications] on the center display.

3. Select [i-DM] on the center display.

4. Select the setting from the main menu.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Setting contents

Control unit

Meter Ambient Display

Display/non-display of the Intelligent Drive Master (i-DM) screen can be switched.

On

On/Off

Instrument cluster

Ending Screen

Display/non-display of the Intelligent Drive Master (i-DM) ending screen can be switched.

Off

On/Off

Instrument cluster

Display of center display	Function	Initial setting	Setting contents	Control unit
Meter Ambient Display	Display/non-display of the Intelligent Drive Master (i-DM) screen can be switched.	On	On/Off	Instrument cluster
Ending Screen	Display/non-display of the Intelligent Drive Master (i-DM) ending screen can be switched.	Off	On/Off	Instrument cluster