Bluetooth® PAIRING PROCEDURE
id092000013300
Without center display
1. Switch the ignition ON (engine off or on).
2. Turn the audio unit on.
3. Select [BT SETUP] by operating the MENU button of the audio unit, and press the POWER/VOLUME button.
4. Select [PAIR DEVICE] by operating the POWER/VOLUME button of the audio unit, and press the POWER/VOLUME button.
5. After "ENTER PIN" is displayed in the audio unit display for approx. 3 s, verify that "PIN 0000 (initial value is 0000)" (4-digit pairing code) is displayed.
6. Input the verified 4-digit pairing code by operating the PRESET 1 button, PRESET 2 button, PRESET 3 button, and PRESET 4 button of the audio unit, and press the POWER/VOLUME button.
7. Verify that "PAIRING" flashes in the display of the audio unit.
8. Input the same 4-digit pairing code which was input to the audio unit to the Bluetooth®-enabled device.
9. After completing the pairing programming, verify that the "Musical note symbol" is displayed in the audio unit display, and then "PAIR SUCCESS" approx. 3 s afterward.
|
With center display
Introduction
If Bluetooth®-enabled device is version 2.0
1. Switch the ignition ON (engine off or on).
2. Select "Settings" from the home screen of the center display as shown in the figure.
|
3. Select the following on the center display.
4. Verify that the 4-digit pairing code (initial value "0000") is indicated in the center display.
5. Input the 4-digit pairing code indicated in the center display into the Bluetooth®-enabled device.
6. Verify that "Pairing complete Connection complete"is indicated in the center display.
If Bluetooth-enabled device is version 2.1 and later
1. Switch the ignition ON (engine off or on).
2. Select "Settings" from the home screen of the center display as shown in the figure.
|
3. Select the following on the center display.
4. Verify the 6-digit code displayed in the center display and the Bluetooth-enabled device.
5. Select [YES] on the center display.
6. Verify that "Pairing complete Connection complete" is indicated in the center display.