CLEARING DTC [i-ELOOP]

id130201000300

1.  Connect the M-MDS to the DLC-2.

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

(1)  Select “Self Test”.

(2)  Select “Modules”.

(3)  Select “DCDC”.

3.  Then, select the “Retrieve CMDTCs” and perform procedures according to directions on the M-MDS screen.

4.  Verify the DTC according to the directions on the M-MDS screen.

5.  Press the clear button on the DTC screen to clear the DTC.

6.  Verify that no DTCs are displayed.

7.  Switch the ignition off.