CHECK VALVE REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5]

id0116ze189700

Check Valve Type A

Note

•  A joint pipe with an exterior shape resembling the check valve may have been installed, however, in this case it is not the check valve. Therefore, when performing the servicing, verify the position of the check valve.

1.  Remove in the order indicated in the table.

am3zzw00017483

1	Evaporative hose (See Evaporative hose installation note.)
2	Check valve

2.  Install in the reverse order of removal.

Evaporative hose installation note

1.  Install the evaporative hose as shown in the figure.

am3zzw00017484

Check Valve Type B

1.  Remove in the order indicated in the table.

am3zzw00016507

1	Evaporative hose
2	Check valve

2.  Install in the reverse order of removal.