REGULATING VALVE POSITION SENSOR INSPECTION [SKYACTIV-D 2.2]

id0140z7217200

PID/DATA Monitor Inspection

Note

•  The regulating valve position sensor is integrated in the regulating valve actuator. The regulating valve actuator is integrated in the turbocharger.

1.  Connect the M-MDS to the DLC-2.

2.  Switch the ignition ON (engine running).

3.  Access the PID/DATA monitor item REGVP and simulation item REGV using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-D 2.2].)

4.  Verify that the PID/DATA monitor item REGVP changes according to the regulating valve opening angle when the simulation item REGV is set from 0 % to 95 %.

•  If not as verified, replace the turbocharger. (See TURBOCHARGER REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

Specification (Reference)

am3zzw00013582