 |
am6zzw00008590
BOOST AIR TEMPERATURE SENSOR INSPECTION [SKYACTIV-D 2.2]
id0140z7218900
Resistance Inspection
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
2. Remove the set plate. (See SET PLATE REMOVAL/INSTALLATION.)
3. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
4. Remove the bolt. (See BOOST AIR TEMPERATURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
5. Remove the charge air cooler duct (RH). (See BOOST AIR TEMPERATURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
6. Disconnect the boost air temperature sensor connector. (See BOOST AIR TEMPERATURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
7. Remove the clip from the bracket. (See BOOST AIR TEMPERATURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
8. Remove the boost air temperature sensor. (See BOOST AIR TEMPERATURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
9. Place the boost air temperature sensor in water with a thermometer, and heat the water gradually.
am6zzw00008590
|
10. Measure the resistance between boost air temperature sensor terminals A and B.
Specification (Reference)
|
Water temperature (°C {°F}) |
Resistance (Kilohms) |
|---|---|
|
0 {32}
|
Approx. 15.00
|
|
50 {122}
|
Approx. 2.20
|
|
100 {212}
|
Approx. 0.508
|
am3zzw00013583
|
