POWER BRAKE UNIT VACUUM SENSOR INSPECTION [SKYACTIV-D 2.2]

id0140z7889400

PID/DATA Monitor Inspection

1.  Connect the M-MDS to the DLC-2.

2.  Switch the ignition ON (engine off).

3.  Verify that the PID BBP value (power brake unit vacuum) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-D 2.2].) (See PCM INSPECTION [SKYACTIV-D 2.2].)

•  If not as specified, replace the power brake unit vacuum sensor. (See POWER BRAKE UNIT VACUUM SENSOR REMOVAL/INSTALLATION.)

Specification (Reference)

am3zzw00013639