POWER BRAKE UNIT VACUUM SENSOR REMOVAL/INSTALLATION

id041100806000

L.H.D.

1.  Remove the battery. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)

2.  Remove in the order indicated in the table.

am3zzw00013714

1	Power brake unit vacuum sensor connector
2	Power brake unit vacuum sensor

3.  Install in the reverse order of removal.

R.H.D.

1.  For SKYACTIV-D 2.2, perform the following procedure:

(1)  Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)

(2)  Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)

(3)  Remove the windshield wiper motor and link. (See WINDSHIELD WIPER MOTOR AND LINK REMOVAL/INSTALLATION.)

(4)  Remove the cowl panel. (See COWL PANEL REMOVAL/INSTALLATION.)

2.  Remove in the order indicated in the table.

am3zzw00013715

1	Power brake unit vacuum sensor connector
2	Power brake unit vacuum sensor

3.  Install in the reverse order of removal.