TIRE PRESSURE MONITORING SYSTEM SET SWITCH INSPECTION

id021200206000

Note
•  The tire pressure monitoring system (TPMS) set switch is integrated with the cluster switch.

1.  Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

2.  Verify that the resistance between the cluster switch terminals B and C is as indicated in the table.

•  If not as indicated in the table, replace the cluster switch.
ac5wzw00000249

TPMS set switch specification

Terminal

Test condition

Resistance (ohms)
B—C
TPMS set switch pressed
187.61—191.39
All switches released
1139.99—1163.01

3.  Apply battery voltage to cluster switch terminal J, and connect terminal I to ground.

4.  Verify that the LED illuminates.

•   If there is any malfunction, replace the cluster switch.