DTC U2300:55/U2300:56 [LASER SENSOR]
id0402c4894800
|
DTC
|
U2300:55, U2300:56
|
Configuration data not recorded
|
|
|
DETECTION CONDITION
|
• Laser sensor detects configuration data not recorded or data error.
|
||
|
FAIL-SAFE FUNCTION
|
• Inhibits the Smart City Brake Support (SCBS) controls.
• Illuminates the Smart City Brake Support (SCBS) indicator light (amber)
|
||
|
POSSIBLE CAUSE
|
• Laser sensor configuration procedure is not done properly
• Correct data cannot be received from instrument cluster
|
||
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
||
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
RECORD CAR CONFIGURATION DATA
• Switch the ignition to off.
• Switch the ignition ON (engine on).
|
Go to the next step.
|
|
|
2
|
VERIFY THAT SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Are the same DTCs present?
|
Yes
|
Repeat the inspection from Step 1.
If the malfunction recurs, go to the next step.
|
|
No
|
Go to step 5.
|
||
|
3
|
INSPECT FOR INSTRUMENT CLUSTER MALFUNCTION
• Switch the ignition off.
• Using the M-MDS, perform the DTC inspection for the instrument cluster.
• Are any DTCs detected?
|
Yes
|
Go to the applicable DTC inspection.
After repairing the instrument cluster, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Are the same DTCs present?
|
Yes
|
Replace the laser sensor.
|
|
No
|
Go to the next step.
|
||
|
5
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||