DTC U0420:68 [LASER SENSOR]
id0402c4895200
|
DTC
|
U0420:68
|
Abnormal message from EPS control module
|
|
|
DETECTION CONDITION
|
• Correct data cannot be received from EPS CM
|
||
|
FAIL-SAFE FUNCTION
|
• Inhibits the Smart City Brake Support (SCBS) controls.
• Illuminates the Smart City Brake Support (SCBS) indicator light (amber)
|
||
|
POSSIBLE CAUSE
|
• EPS CM malfunction
|
||
|
SYSTEM WIRING DIAGRAM
|
Not applicable
|
||
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT FOR EPS CONTROL MODULE MALFUNCTION
• Switch the ignition off.
• Using the M-MDS, perform the DTC inspection for the EPS control module.
• Are any DTCs detected?
|
Yes
|
Go to applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Are the same DTCs present?
|
Yes
|
Repeat the inspection from Step 1.
If the malfunction recurs, replace the EPS CM, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||