DISC PAD (REAR) REPLACEMENT

id041100800300

Note

•  Verify the shape of the caliper shown in the figure to determine type A or B.

am3zzw00015895

1.  Remove in the order indicated in the table.

2.  Install in the reverse order of removal.

3.  After installation, pump the brake pedal a few times and inspect the following:

―  The disc pad projection is securely installed to the piston groove

―  Parking brake lever stroke

―  Brake drag

REAR CALIPER TYPE A

am3zzw00020475

1	Caliper installation bolt (See Caliper Installation Bolt Removal Note.) (See Caliper Installation Bolt Installation Note.)
2	Disc pad
3	Shim
4	Guide plate

REAR CALIPER TYPE B

am3zzw00020476

1	Caliper installation bolt (See Caliper Installation Bolt Removal Note.) (See Caliper Installation Bolt Installation Note.)
2	Disc pad
3	Shim
4	Guide plate

Caliper Installation Bolt Removal Note

1.  Remove the caliper installation bolt shown in the figure and lift up the caliper.

am3uuw00010862

Caliper Installation Bolt Installation Note

1.  Clean the exposed area of the piston.

2.  Rotate the piston clockwise slowly using the SST and push the piston completely until the piston grooves are in the position shown in the figure.

am3zzw00015896

3.  Return the caliper to the original position and install the caliper installation bolt.