BRAKE FLUID LEVEL SENSOR INSPECTION

id041100801400

Note

•  Verify the shape of the brake fluid reserve tank shown in the figure to determine type A or B. (L.H.D.)

am3zzw00015877

1.  Disconnect the brake fluid level sensor connector from the master cylinder.

2.  Inspect for continuity according to fluid level between the brake fluid level sensor terminals.

L.H.D. (MASTER CYLINDER TYPE A), R.H.D.

am3uuw00010270

L.H.D. (MASTER CYLINDER TYPE B)

am3uuw00012851

•  If not as indicated in the table, replace the reserve tank. (See MASTER CYLINDER REMOVAL/INSTALLATION [L.H.D.].) (See MASTER CYLINDER REMOVAL/INSTALLATION [R.H.D.].)

am3zzw00015878