INPUT/TURBINE SPEED SENSOR INSPECTION [FN4A-EL]

id051701292500

Caution

•  Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

On-Vehicle Inspection

1.  Perform the following procedures.

(1)  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)

(2)  Disconnect the input/turbine speed sensor connector.

am3zzw00007386

2.  Measure the resistance between the input/turbine speed sensor terminals A and B.

am3uuw00002414

•  If there is any malfunction, replace the input/turbine speed sensor. (See INPUT/TURBINE SPEED SENSOR REMOVAL/INSTALLATION [FN4A-EL].)

Off-Vehicle Inspection

1.  Measure the resistance between the input/turbine speed sensor terminals A and B.

am3uuw00002414

•  If there is any malfunction, replace the input/turbine speed sensor. (See INPUT/TURBINE SPEED SENSOR REMOVAL/INSTALLATION [FN4A-EL].)