MAGNETIC CLUTCH ADJUSTMENT [MZR 1.6]


id0711000064k3

Warning
•  If A/C compressor operation is performed, do not start the engine. Otherwise, the drive belt could get caught and cause an accident.

1.  Remove the front under cover No.2. (See FRONT UNDER COVER No.2 REMOVAL/INSTALLATION.)

2.  Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

am3zzw00015083

3.  Verify the clearance.

•  If the clearance is not within the specification, adjust the clearance by changing the type or number of the shim kit. (See MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY [MZR 1.6].)
am6xuw00006130
Magnetic clutch clearance
0.30—0.60 mm {0.012—0.023 in}