AIR MIX ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

id0740a1802400

L.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

Driver-side (With Dual Type Climate Control Unit)

1.  Remove the following parts:

(1)  Side wall (driver-side) (See SIDE WALL REMOVAL/INSTALLATION.)

(2)  Front heat duct (driver-side) (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am6xuw00006139

3.  Remove the screw.

4.  Remove the driver-side air mix actuator.

5.  Install in the reverse order of removal.

Passenger-side

1.  Remove the following parts:

(1)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(2)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(3)  Side wall (passenger-side) (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Front heat duct (passenger-side) (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am3uuw00011859

3.  Remove the screw.

4.  Remove the Passenger-side air mix actuator.

5.  Install in the reverse order of removal.

R.H.D.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)

Driver-side (With Dual Type Climate Control Unit)

1.  Remove the following parts:

(1)  Side wall (driver-side) (See SIDE WALL REMOVAL/INSTALLATION.)

(2)  Front heat duct (driver-side) (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am3zzw00015122

3.  Remove the screw.

4.  Remove the driver-side air mix actuator.

5.  Install in the reverse order of removal.

Passenger-side

1.  Remove the following parts:

(1)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(2)  Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(3)  Side wall (passenger-side) (See SIDE WALL REMOVAL/INSTALLATION.)

(4)  Front heat duct (passenger-side) (See FRONT HEAT DUCT REMOVAL/INSTALLATION.)

2.  Disconnect the air mix actuator connector.

am3zzw00015123

3.  Remove the screw.

4.  Remove the passenger-side air mix actuator.

5.  Install in the reverse order of removal.