SECURITY INDICATOR LIGHT: 15, DTC: B13D3:51/P1260:00 [IMMOBILIZER SYSTEM]

id0902e4028000

Description

Unregistered remote transmitter is detected
Detection condition
•  Start stop unit detects that the remote transmitter has not been programmed.
Fail-safe function
Not applicable
Possible cause
•  Remote transmitter malfunction
―  The remote transmitter is not programmed after replacing the start stop unit.
―  Unprogrammed remote transmitter was used.
•  Start stop unit malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

Step

Inspection

Action
1
VERIFY IF REMOTE TRANSMITTER BROUGHT INTO VEHICLE IS FOR THAT VEHICLE
•  Does the remote transmitter belong to another vehicle?
Yes
Have the correct transmitter for the vehicle ready inside the vehicle, then go to Step 3.
No
Go to the next step.
2
PERFORM DTC INSPECTION AND VERIFY REMOTE TRANSMITTER MALFUNCTION
•  Clear the DTC for the immobilizer system using the M-MDS.
•  Program key ID number of the remote transmitter.
•  Retrieve the immobilizer system DTCs using the M-MDS.
•  Is the security indicator light: 15, DTC B13D3:51/P1260:00 displayed?
Yes
Replace the malfunctioning remote transmitter, then go to the next step.
(See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING.)
No
Go to Step 4.
3
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear the DTC for the immobilizer system using the M-MDS.
•  Retrieve the immobilizer system DTCs using the M-MDS.
•  Is the security indicator light: 15, DTC B13D3:51/P1260:00 displayed?
Yes
Repeat the inspection from Step 1.
•  If the malfunction recurs, replace the start stop unit.
Go to the next step.
No
Go to the next step.
4
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [IMMOBILIZER SYSTEM].)
No
DTC troubleshooting completed.