DTC B10A5:49 [REAR BODY CONTROL MODULE (RBCM)]
id0902p4013400
|
Description |
Theft-deterrent siren internal malfunction |
|---|---|
|
Detection condition
|
• Rear body control module (RBCM) detects the theft-deterrent siren internal malfunction for 1.5 s or more.
|
|
Fail-safe function
|
Not applicable
|
|
Possible cause
|
• Theft-deterrent siren malfunction
• Rear body control module (RBCM) malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY REAR BODY CONTROL MODULE (RBCM) DTCs AGAIN
• Clear the DTC for the rear body control module (RBCM) using the M-MDS.
• Switch the ignition ON (engine on) and wait for 3 s or more.
• Retrieve the rear body control module (RBCM) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
2
|
INSPECT THEFT-DETERRENT SIREN
• Inspect the theft-deterrent siren.
• Is the theft-deterrent siren normal?
|
Yes
|
Go to the next step.
|
|
No
|
Replace the theft-deterrent siren, then go to the next step.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the rear body control module (RBCM) using the M-MDS.
• Switch the ignition ON (engine on) and wait for 3 s or more.
• Retrieve the rear body control module (RBCM) DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the rear body control module (RBCM).
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||