DTC B1026:96 [START STOP UNIT]


id0902p6019200

Description

Steering lock malfunction

Detection condition
•  Start stop unit detects the start stop unit internal malfunction.
Fail-safe function
Not applicable
Possible cause
•  Start stop unit malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

Step

Inspection

Action

1
PERFORM DTC INSPECTION AND VERIFY START STOP UNIT MALFUNCTION
•  Clear the DTC for the start stop unit using the M-MDS.
•  Retrieve the start stop unit DTCs using the M-MDS.
•  Is the same DTC displayed?
Yes
Repeat the inspection from Step 1.
•  If the malfunction recurs, replace the start stop unit.
Go to the next step.
No
Go to the next step.
2
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
No
DTC troubleshooting completed.