FRONT DOOR LOCK-LINK SWITCH INSPECTION

id091400005700


LH

1.  Perform the front door glass preparation. (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

3.  Remove the following parts:

(1)  Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)
(2)  Front inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)
(3)  Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)
(4)  Front door module panel (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION.)
(5)  Front door key cylinder (See FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)
(6)  Front door latch and lock actuator (See FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4.  When the door lock knob cable is pulled or pressed in, verify that the continuity is as indicated in the table.

am3uuw00009820
am3uuw00009821

•  If not as indicated in the table, replace the front door latch and lock actuator.


RH

1.  Perform the front door glass preparation. (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

3.  Remove the following parts:

(1)  Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)
(2)  Front inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)
(3)  Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)
(4)  Front door module panel (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION.)
(5)  Front door key cylinder (See FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)
(6)  Front door latch and lock actuator (See FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4.  When the door lock knob cable is pulled or pressed in, verify that the continuity is as indicated in the table.

am3uuw00009822
am3uuw00009823

•  If not as indicated in the table, replace the front door latch and lock actuator.