FRONT DOOR LATCH SWITCH INSPECTION

id091400511400

1. Perform the front door glass preparation. (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

3. Remove the following parts:

(1) Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

(2) Front inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)

(3) Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION.)

(4) Front door module panel (See FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION.)

(5) Front door key cylinder (See FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION.)

(6) Front door latch and lock actuator (See FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4. Verify that the continuity is as indicated in the table.

am3uuw00009815

am3uuw00009816

• If not as indicated in the table, replace the front door latch and lock actuator.

Note

• When inspecting the latch side of the front door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.

ac5jjw00000020