LIFTGATE OPENER SWITCH INSPECTION
id091400516200
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)
2. Remove the following parts:
- (1) Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)
-
- (2) Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
-
- (3) Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION.)
-
- (4) Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION.)
-
- (5) Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION.)
-
- (6) Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION.)
-
- (7) Liftgate opener switch (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION.)
-
3. Verify the continuity of liftgate opener switch terminals A and C.
-
• If not as indicated in the table, replace the liftgate opener switch.