REAR SPOILER INSTALLATION
id091600802600
4SD
1. When a rear spoiler is to be reused, perform the following procedure:
|
|
2. Peel off the paper backing from the double-sided adhesive tape and install the rear spoiler clips in the order of arrows (1), (2), and (3) shown in the figure.
|
3. Install the bolts shown in the figure.
|
4. Install the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION.)
5. Install the trunk lid recess. (See TRUNK LID RECESS REMOVAL/INSTALLATION.)
5HB
1. Install the side spoiler to the rear spoiler.
|
2. When a rear spoiler is to be reused, perform the following procedure:
|
|
3. Install the grommet of the high-mount brake light wiring harness.
|
4. Push the rear spoiler and side spoiler in the direction of the arrows in the order of (1), (2), (3), (4), (5) and install the rear spoiler and side spoiler.
|
5. Install the nuts shown in the figure, and install the rear spoiler.
|
6. Install the caps shown in the figure.
|
7. Connect the high-mount brake light connector and install the wiring harness to the hook.
|
8. Install the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)
9. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)