TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION

id091700803200

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the following parts:

(1)  Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)

(2)  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(3)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)

(4)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

3.  Move the tire house trim in the direction of the arrow shown in the figure and peel it back partially until the hooks and clip are detached.

am3ccw00001674

4.  Remove the fastener.

am3ccw00001675

5.  Pull out area A of the cargo hook cover and remove the cargo hook cover.

6.  Partially peel back the seaming welt.

7.  Pull the trunk side upper trim in the direction of the arrow in the order of (1), (2), (3), (4) and remove it while detaching clips A, clips B and hooks.

am3zzw00017350

8.  Disconnect the cargo room light connector. (LH only)

9.  Install in the reverse order of removal.