CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

id094000439800

Note

• Settings of some personalization features displayed on the M-MDS cannot be switched depending on the vehicle specification.

Rear Window Defroster System

Rear window defroster system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the F_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Rear Defogger operating time

The operation time for the rear window defroster can be changed.

15 minutes

15 minutes / Continuous

Front body control module (FBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Rear Defogger operating time	The operation time for the rear window defroster can be changed.	15 minutes	15 minutes / Continuous	Front body control module (FBCM)

Security And Locks

Power door lock system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Auto Door Lock Mode.

Auto door lock function can be changed.

Lock: Driving, Unlock: IGN Off.

Not Adopted./OFF/Lock When Driving./Lock: Driving, Unlock: IGN Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P.

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Auto Door Lock Mode.	Auto door lock function can be changed.	Lock: Driving, Unlock: IGN Off.	Not Adopted./OFF/Lock When Driving./Lock: Driving, Unlock: IGN Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P.	Rear body control module (RBCM)

Power door lock system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Lighting Systems

Turn light system (Australian, European (L.H.D. U.K.), Israel specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

3-Flash Turn Signal.

The turn light system can be switched between operable and inoperable.

ON

Not Adopted./OFF/ON

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
3-Flash Turn Signal.	The turn light system can be switched between operable and inoperable.	ON	Not Adopted./OFF/ON	Rear body control module (RBCM)

Turn light system (Except Australian, European (L.H.D. U.K.), Israel specs.) (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

3-Flash Turn Signal.

The turn light system can be switched between operable and inoperable.

OFF

Not Adopted./OFF/ON

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
3-Flash Turn Signal.	The turn light system can be switched between operable and inoperable.	OFF	Not Adopted./OFF/ON	Rear body control module (RBCM)

Turn light system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Auto light system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Auto-headlight On.

Auto light sensor sensitivity can be changed.

Medium

Not Adopted./Dark/Medium Dark/Medium/Medium Light/Light

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Auto-headlight On.	Auto light sensor sensitivity can be changed.	Medium	Not Adopted./Dark/Medium Dark/Medium/Medium Light/Light	Rear body control module (RBCM)

Note

• If the mode is set to “Light” and “Medium Light”, the illumination level for illuminating the TNS and headlight increases. Therefore, the TNS and headlights illuminate when the ambient light is brighter than when the level is set to “Medium”. In addition, if the mode is set to “Medium Dark” and “Dark”, the illumination level for illuminating the TNS and headlights decreases. Therefore, the TNS and headlights illuminate when the ambient light is lower than when the level is set to “Medium”.

Auto light system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Headlight system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Coming Home Light operation time

The coming home light system operation time can be switched.

30 seconds.

Not Adopted./0 seconds./30 seconds./60 seconds./90 seconds./120 seconds.

Rear body control module (RBCM)

Leaving Home Light system

The leaving home light system can be switched between operable and inoperable.

Off (except European (L.H.D. U.K.) specs.)/On (European (L.H.D. U.K.) specs.)

Not Adopted./Off/On

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Coming Home Light operation time	The coming home light system operation time can be switched.	30 seconds.	Not Adopted./0 seconds./30 seconds./60 seconds./90 seconds./120 seconds.	Rear body control module (RBCM)
Leaving Home Light system	The leaving home light system can be switched between operable and inoperable.	Off (except European (L.H.D. U.K.) specs.)/On (European (L.H.D. U.K.) specs.)	Not Adopted./Off/On	Rear body control module (RBCM)

Headlight system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Room light control system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Interior Light Timeout-Door Open.

• The front/rear map light and courtesy light illumination time after any door is open can be changed.

• The trunk compartment light (4SD)/cargo compartment light (5HB) illumination time after trunk (4SD)/liftgate (5HB) is open can be changed.

30 minutes.

Not Adopted./30 minutes./60 minutes./10 minutes.

Rear body control module (RBCM)

Interior Light Timeout-Door Closed.

The front/rear map light and courtesy light illumination time after all door are closed can be changed.

15 seconds.

Not Adopted./15 seconds./7.5 seconds./30 seconds./60 seconds.

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Interior Light Timeout-Door Open.	• The front/rear map light and courtesy light illumination time after any door is open can be changed. • The trunk compartment light (4SD)/cargo compartment light (5HB) illumination time after trunk (4SD)/liftgate (5HB) is open can be changed.	30 minutes.	Not Adopted./30 minutes./60 minutes./10 minutes.	Rear body control module (RBCM)
Interior Light Timeout-Door Closed.	The front/rear map light and courtesy light illumination time after all door are closed can be changed.	15 seconds.	Not Adopted./15 seconds./7.5 seconds./30 seconds./60 seconds.	Rear body control module (RBCM)

Room light control system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Auto light-off system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Headlight Off Timer.

The headlight emitted time of the auto light off timer can be changed.

30 seconds.

Not Adopted./0 seconds./30 seconds./60 seconds./90 seconds./120 seconds.

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Headlight Off Timer.	The headlight emitted time of the auto light off timer can be changed.	30 seconds.	Not Adopted./0 seconds./30 seconds./60 seconds./90 seconds./120 seconds.	Rear body control module (RBCM)

Auto light-off system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Wiper/washer System

Auto wiper system (Using M-MDS)

1. Connect the M-MDS to DLC-2.

2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• Select the “Module Programming”.

• Select “Programmable Parameters”.

• Select menu in the R_BCM.

3. Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Rain Sensing Wipers.

The auto wiper function can be disabled.

On (Rain Sensing)

Not Adopted./Off^*1 (Intermittent)/On (Rain Sensing)

Rear body control module (RBCM)

M-MDS display	Function	Initial setting	Setting contents	Control unit
Rain Sensing Wipers.	The auto wiper function can be disabled.	On (Rain Sensing)	Not Adopted./Off^*1 (Intermittent)/On (Rain Sensing)	Rear body control module (RBCM)

*1 :If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.

Auto wiper system (Using center display)

• (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)