FUEL-FILLER PIPE REMOVAL/INSTALLATION [SKYACTIV-D 2.2]
id0114z7806900
1. Level the vehicle.
2. Complete the “BEFORE SERVICE PRECAUTION”. (See BEFORE SERVICE PRECAUTION [SKYACTIV-D 2.2].)
3. Drain the fuel. (See FUEL DRAINING PROCEDURE [SKYACTIV-D 2.2].)
4. Open the fuel-filler lid.
5. Remove in the order shown in the figure.
|
1
|
Fuel-filler cap
|
2
|
Dust cover
(See Dust Cover Removal Note.)
|
3
|
Breather hose
|
4
|
Joint hose
(See Joint Hose Installation Note.)
|
5
|
Fuel-filler pipe
|
6
|
Fuel-filler pipe protector
|
7
|
Evaporative hose
|
6. Install in the reverse order of removal.
7. Complete the “AFTER SERVICE PRECAUTION”. (See AFTER SERVICE PRECAUTION [SKYACTIV-D 2.2].)
Dust Cover Removal Note
1. Remove the rear mudguard (LH). (See MUDGUARD REMOVAL/INSTALLATION.)
2. Release the dust cover tab using a flathead screwdriver as shown in the figure.
|
3. Remove the dust cover.
Fuel-filler Pipe Removal Note
1. Remove the rear tire (LH). (See WHEEL AND TIRE SPECIFICATION.)
2. Remove the rear crossmember. (See REAR CROSSMEMBER REMOVAL/INSTALLATION.)
3. Remove the fuel-filler pipe.
Joint Hose Installation Note
1. Connect the joint hose to the fuel-filler pipe as shown in the figure.
|
Breather Hose Installation Note
1. Align the marking and connect the breather hose to the fuel-filler pipe as shown in the figure.
|