DC-DC CONVERTER REMOVAL/INSTALLATION [SKYACTIV-D 1.5]

id0117q6004600

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the air cleaner and fresh-air duct component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

3.  Remove the wiring harness clip shown in the figure.

am3zzw00017491

4.  Remove in the order indicated in the table.

5.  Install in the reverse order of removal.

am3zzw00017222

1	Nut
2	DC-DC converter connector (See DC-DC Converter Connector Disconnection Note.) (See DC-DC Converter Connector Connection Note.)
3	DC-DC converter

DC-DC Converter Connector Disconnection Note

1.  While pressing the tab in the direction of arrow (1) shown in the figure, move the connector lever in the direction of arrow (2).

am3zzw00017223

2.  Disconnect the DC-DC converter connector.

DC-DC Converter Connector Connection Note

1.  Before installation, verify that the connector lever is unlocked position.

ac5wzw00002644

2.  Connect the DC-DC converter connector using the following procedure:

(1)  Insert the DC-DC converter connector straight until it stops.

ac5wzw00002645

(2)  Move the connector lever until a click sound is heard.

ac5wzw00002646