AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5]

id0140g5899700

Warning

•  A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.

Caution

•  Do not allow flammable objects such as the taping for bundling wiring harness to come into contact with the exhaust manifold and silencer.

SKYACTIV-G 1.5

am3zzw00014894

SKYACTIV-G 2.0, SKYACTIV-G 2.5

am3zzw00013578

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)

2.  Disconnect the A/F sensor connector.

3.  Remove the clip from the bracket.

am6zzw00008580

4.  Remove the wiring harness from the wire clip A and B. (See Assembly of Wiring Harness to Wire Clip Note.)

ac5wzw00000300

5.  Remove the A/F sensor using the SST.

ac5wzw00003986

6.  Install in the reverse order of removal.

Assembly of Wiring Harness to Wire Clip Note

•  Secure the heat shrinkable tube on the wiring harness to wire clip A.

am6zzw00008581

•  Secure the wiring harness to wire clip B so that the band on the wiring harness is positioned to the position shown in the figure.

am6zzw00008582