ENGINE OIL TEMPERATURE SENSOR INSPECTION [SKYACTIV-D 1.5]

id0140q2216800

Resistance Inspection

Note

•  The engine oil temperature sensor and engine oil pressure sensor cannot be removed as a single unit. When replacing the engine oil temperature sensor or engine oil pressure sensor, replace the engine oil temperature sensor/engine oil pressure sensor.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [SKYACTIV-D 1.5].)

3.  Remove the engine coolant reserve tank. (See ENGINE COOLANT RESERVE TANK REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

4.  Remove the following parts: (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

•  Fresh-air duct

•  Air cleaner

•  Air hose

•  Air inlet pipe

5.  Remove the battery and battery tray (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

6.  Remove the turbocharger air outlet pipe (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

7.  Remove the intake shutter valve. (See INTAKE SHUTTER VALVE REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

8.  Disconnect the engine oil temperature sensor/engine oil pressure sensor connector. (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

9.  Measure the resistance between engine oil temperature sensor/engine oil pressure sensor terminals E and C.

am3zzw00017808

•  If not as specified, replace the engine oil temperature sensor/engine oil pressure sensor. (See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

Resistance

Engine oil temperature (°C {°F})	Resistance (Kilohms)
−40 {−40}	Approx. 44.9
0 {32}	Approx. 5.78
25 {77}	Approx. 2.04
140 {284}	Approx. 0.0719

Specification (Reference)

am2zzw00011360