FUEL TEMPERATURE SENSOR INSPECTION [SKYACTIV-D 1.5]

id0140q2806400

Resistance Inspection

Note

•  The fuel temperature sensor cannot be removed as a single unit. When replacing the fuel temperature sensor, replace it together with the lower case as a single unit.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

3.  Disconnect the fuel temperature sensor connector.

4.  Measure the resistance between fuel temperature sensor terminals A and B.(See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-D 1.5].)

am3zzw00017821

•  If not as specified, replace the lower case. (See LOWER CASE REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

Resistance

Fuel temperature (°C {°F})	Resistance (Kilohms)
20 {68}	Approx. 2.45

Specification (Reference)

am2zzw00011435