PASSENGER-SIDE AIR BAG MODULE REMOVAL
id081000808200
|
1. Switch the ignition off.
2. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)
3. Remove the following parts:
4. Remove the cap.
|
5. Using a flathead screwdriver, lift the locking device carefully, however do not remove it.
6. Disconnect the passenger-side air bag module connector.
7. Remove the fastener.
|
8. Remove the nuts.
|
9. Remove the brackets.
10. Remove the screws.
|
11. Move the passenger-side air bag module in the direction of arrow (2) shown in the figure and detach guide A from the dashboard while spreading the dashboard in the direction of arrow (1).
|
12. While avoiding area A shown in the figure, pull the front side of the passenger-side air bag module in the direction of the arrows shown in the figure (3).
|
13. Move the passenger-side air bag module in the direction of the arrow (4) and detach guides B from the dashboard (5).
|
14. Remove the passenger-side air bag module (6).