REAR SEAT BELT REMOVAL/INSTALLATION

id081100800800

Caution

•  If the retractor is disassembled, it will not operate correctly due to looseness and excessive play of the internal parts, therefore, do not disassemble the retractor.

4SD

1.  Remove the rear seat belt from the guide.

am3uuw00010348

2.  Remove the following parts:

(1)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

(2)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION.)

(4)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(5)  C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(6)  Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

3.  Remove the bolts.

am3zzw00015643

4.  Remove the rear seat belt in the direction of the arrow.

5.  Install in the reverse order of removal.

5HB

1.  Remove the rear seat belt from the guide.

am3uuw00010348

2.  Remove the following parts:

(1)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

(2)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)

(4)  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(5)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

3.  Set the tire house trim aside. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

4.  Remove the trunk side upper trim. (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

5.  Remove the bolts.

am3zzw00015644

6.  Remove the rear seat belt in the direction of the arrow.

7.  Install in the reverse order of removal.