DTC U2300:56 [HEADLIGHT AUTO LEVELING SYSTEM]
id0902i7018000
|
Description |
Configuration data unmatched with instrument cluster |
|---|---|
|
Detection condition
|
• Configuration data of the auto leveling control module and instrument cluster are not matched.
|
|
Fail-safe function
|
• Control of the headlight auto leveling system is continued.
|
|
Possible cause
|
• DTCs are stored in the instrument cluster.
• Instrument cluster configuration data error
• Auto leveling control module malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY INSTRUMENT CLUSTER DTCs
• Retrieve the instrument cluster DTCs using the M-MDS.
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
Go to the next step.
|
||
|
2
|
RESET INSTRUMENT CLUSTER CONFIGURATION DATA
• Using the M-MDS, perform the instrument cluster configuration (using As-Built data).
• Clear the DTC for the auto leveling control module using the M-MDS.
• Retrieve the auto leveling control module DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Using the M-MDS, perform the instrument cluster configuration (using As-Built data) again, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the auto leveling control module using the M-MDS.
• Retrieve the auto leveling control module DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the auto leveling control module.
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||