REAR DOOR LATCH SWITCH INSPECTION

id091400511900

1. Fully lower the rear door glass.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

3. Remove the following parts:

(1) Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(2) Rear inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)

(3) Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION.)

(4) Rear power window motor (See REAR POWER WINDOW MOTOR REMOVAL/INSTALLATION.)

(5) Rear door quarter glass (See REAR DOOR QUARTER GLASS REMOVAL/INSTALLATION.)

(6) Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION.)

(7) Rear door latch and lock actuator (See REAR DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4. Verify that the continuity is as indicated in the table.

am3uuw00009828

am3uuw00009829

• If not as indicated in the table, replace the rear door latch and lock actuator.

Note

• When inspecting the latch side of the rear door latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.

ac5jjw00000020